The 2024 Dodge Challenger uses the LC platform with a 5x115mm bolt pattern and 71.5mm hub bore — the same fundamental specification shared across all Challenger production years regardless of trim level. Unlike the Hellcat variant, the base Challenger runs smaller single-piston front calipers that provide significantly more inner barrel clearance flexibility when selecting aftermarket wheels. This page covers 20x10.5 / 20x12 wheels with 295/35R20 / 335/30R20 tires in the +25 to +35mm offset range. The 2024 Challenger base continues on the long-running LC platform — a testament to the structural soundness of the original 2008 design. By this era, fitment data for Challenger is mature and well-documented across the enthusiast community. Hub bore 71.5mm, bolt pattern 5x115mm, single-piston front calipers on base trim. The Widebody package is not available on base trim Challengers, so the fender opening is the standard narrower body — maximum practical front tire width without fender modification is approximately 275mm section width at stock ride height. The +25 to +35mm offset window here provides full fender clearance under dynamic suspension loads at standard ride height. The LC Challenger's rear axle is a live unit — the same solid axle used across the full model range. Rear tire width expansion on a live-axle Challenger is limited by wheel well clearance at full bump: widths beyond 305mm section typically require a mild flare or liner modification at the rear. The 295/35R20 / 335/30R20 rear tire on a 20x10.5 / 20x12 rear wheel at +25 to +35mm offset sits within the proven range for stock-height LC applications. Confirm with the car at full suspension compression before extended highway driving, as road impacts can bring the tire close to the inner fender edge.

Available Tire Fitments